Your SEO optimized title page contents
Product Categories

My Blog

Eddie 06/07/2016
18 Comments
Leave a reply
Optional, for replies
Your Comments
Colum 14/11/2016

Hello I pookie for two carbon brushes for hitachi C8FSE, 216mm compound mitre saw 110v also for a draper 240v mitre saw which are 17x17x7mm

admin 15/02/2017

http://www.mrcarbonbrush.com/c8fse_c8fshe_d10v_d10y_d13v/p2644628_16132705.aspx for hitachi http://www.mrcarbonbrush.com/draper_bts350_chop_saw_1800w/p2644628_13735590.aspx for draper

Reply
isaac cormack 15/02/2017

carbon brushes for tooltec 11940006

admin 15/02/2017

http://www.mrcarbonbrush.com/tooltec_11940006/p2644628_15548456.aspx

Reply
Christy 05/09/2016

Hi, I have a set of HTEG23-660 hedge trimmers and the bushes have gone can you please help me replace them as I am at a loss without my trimmers.

admin 24/10/2016

http://www.mrcarbonbrush.com/Spear_and_Jackson_HTEG23660/p2644628_16575309.aspx YES IF THEY ARE THE 8MM WIDE ONES HERE, IF YOU NEED THE 10MM WIDE ONES PLEASE ASK

Reply
John kinnear 06/12/2016

I need brushes for power devil grinder3x6x15mms

admin 15/02/2017

yes what model

Reply
Craig Hall 29/09/2016

I have a kinzo 25c06 paddle mixer & I'm trying to sourse 2 carbon brushes for it ! Can you help ?

admin 24/10/2016

http://www.mrcarbonbrush.com/kinzo_25c706_reciprocating_saw/p2644628_14490880.aspx

Reply
Devin Jacobson 28/12/2016

I am looking to replace the 2 carbon brushes on a Babyliss Pro hair Dryer , BABNTB6610N , 125V AC 60 Hz 2000W, they are quite small, square, the spring is about the size found in a click pen... I did not find anything on model search :) Thanks!

admin 15/02/2017

http://www.mrcarbonbrush.com/Whal_500m_hair_dryer/p2644628_13128533.aspx these should fit 4mmx4mm thanks

Reply
John Hunter 01/09/2016

Looking for carbon brushes for Harbor Freight Tools portable utility water pump, 1500 GPM, Pacific Hydrostar # 65836

admin 24/10/2016

YES HERE THANKS http://www.mrcarbonbrush.com/65836/p2644628_15713301.aspx

Reply
Carol Jones 30/12/2016

Hi looking for brushes for an Aldi GCS2000S Chainsaw. Can you help. Many thanks

admin 15/02/2017

http://www.mrcarbonbrush.com/gardenline_gcs2000s/p2644628_13012119.aspx these are same size thanks

Reply
David Kinnear 01/02/2017

Hi I'm after carbon brushes for a Sip-Cinderson motor from a Vax Vacuum Cleaner actual size is 9.5 x 6.1 and they have a lug on the brass end. Thanks David

admin 15/02/2017

http://www.mrcarbonbrush.com/vax_sip_cinderson_motor/p2644628_15903790.aspx these fit use your old cap to make contact with disk in new ones

Reply